What are the advantages of a car paint room?

What are the advantages of a car paint room?
First, the rapid processing, the effect of pride: car paint room is a large set of equipment. Before use, the car usually goes through preliminary treatment. The utility model not only eliminates the disadvantages of manual processing, improves the work efficiency, but also improves the quality of paint in the paint repair work. This is not only because the paint room can be set in accordance with the operating personnel to paint the uniform temperature rise and rapid drying and baking room can be isolated from outside the dust and other pollutants caused by paint pollution, that eliminates the need for subsequent polishing finish processing work.
Two, good working environment. The car paint room in order to keep the air clean inside the paint room, paint room are equipped with various types of filtering devices, such as filter dust, used to filter into the baking room in the air, and ventilation system will make the paint baking room there is room enough ventilation speed, so as to ensure the clean air paint room. In many cases, body paint pollution is caused by human factors, such as vehicle vehicles have not been thoroughly clean into the paint room, paint or personnel without wearing special protective clothing, or paint room is not clean.
Three, high efficiency, quality assurance. Compared to artificial painting, baking paint, car paint room is mechanized "one-stop" service, work efficiency is high, several times, or even dozens of times. Moreover, when painting, the external air is filtered through the primary filter screen, and is sent to the roof by the fan, and then filtered into the room after two filtering and cleaning. The air in the room adopts a full down type, which flows downward at the rate of 0.2-0.3m/s, so that the paint mist particles can not stay in the air until the air outlet is discharged directly through the bottom air outlet. This constant cycle conversion, make painting room air cleanliness reached above 98%, and into the air with a certain pressure, but a constant flow formed in the car around to remove excess paint, so as to maximize the quality of paint. Smooth finish, no impurities, high polishing.
Four, high safety factor. Automobile paint room is usually equipped with constant temperature controller and safety explosion-proof system. When the car is painted, the air door is placed in the paint baking position, and the temperature in the hot air circulation oven is rapidly raised to a predetermined drying temperature (55 - 60 DEG C). Fan outside fresh air early after filtration, gas chamber heat exchange is sent to the roof with baking heat energy converter, and then after second times of filtration and purification, hot air after air circulation within the role, in addition to small amounts of fresh air, most of the hot air and continue to be heated by the temperature gradually increased, paint room in. When the temperature reaches the set temperature, the burner automatically stops; when the temperature drops to the setting temperature, the fan and burner are automatically opened, so that the temperature in the paint baking room is relatively constant. Finally, when the baking time reached the set time, the paint room automatically shut down, paint construction safety ended.